3 axis cnc tube bender is a machine with a wide range of applications, from a small part of a refrigerator to the bending of underground pipes. 3 axis cnc tube bender is always innovating. The new 3 axis cnc tube bender offers advanced functionality and many features to help workers run machines more efficiently. Operators who have mastered the new machine control features can take advantage of these features to improve performance. Workpiece mold specification memory: Most of the new CNC3 axis cnc tube Benders have one common feature.

The ability to store workpiece specifications and all relevant machining information, such as mold type, position and bending sequence. Moreover, the CNC function enables the operator to store and access the tool library, which provides convenience for the management of the tool inventory. Material thickness detection: When using a finishing die, 3 axis cnc tube bender can detect changes in material thickness and perform real-time bending calculations, thereby reducing the number of parts with too large or insufficient bending angles. 3-D graphic display and bending simulation: As the workpiece is bent, these features show the bending process of the part on the controller screen to avoid material scrap caused by incorrect part forming.

For off-line programming of 3 axis cnc tube bender, 3 axis cnc tube bender off-line programming can save preparation time because workers do not have to program parts. Part programs can be programmed by technicians and transmitted down to 3 axis cnc tube bender.

As for how to operate the anticorrosive tube, we can bend the tube with 3 axis cnc tube bender. First, the direction of the tube should be levelled so that the anticorrosive tube is in the mold with the base and the wedge. Two handles (base control handle and wedge control handle) are needed to achieve this process. When the anticorrosive tube is put in place, the wedge pressure reaches 210bar.

Press the base control handle to make the main top oil cylinder rise. When it rises to a certain height, release the handle and stop for 1-2 seconds to reduce resilience. At this time, you can measure the Angle of the cold bending pipe with an Angle ruler. 3 axis cnc tube bender lifts the wedge control handle, releases the wedge cylinder pressure, and then measures the bending Angle to find the change of the front and back Angle, which is caused by the elasticity of steel, but how to know the rebound rate of steel? In general, when the bending Angle reaches 1 degree, the actual natural Angle is only 0.5 degree.

When each cold-formed pipe starts to simmer, the first two times, the last two times and the middle one need to be measured, which can reduce the influence of various factors on the bending Angle (material). The working principle of the hydraulic 3 axis cnc tube bender is actually very simple: the cnc hydraulic 3 axis cnc tube bender is composed of an oil cylinder, a support and a mold.

3 axis cnc tube bender https://www.john-sheng.com/Automatic-multi-axis-CNC-servo-bender-for-auto-seat-frame-in-MPV-type.html