biaxial cnc machine, daily scheduled maintenance is also important? The daily maintenance of CNC machine tools requires maintenance personnel not only to have knowledge of machinery, processing technology and hydraulics, but also to have knowledge of electronic computers, automatic control, drive and measurement technology, so as to fully understand and master the timely maintenance of CNC lathes. The main maintenance work is as follows:

(1) Choose the appropriate use environment

The use of CNC lathe environment (such as temperature, humidity, vibration, power supply voltage, frequency and interference, etc.) will affect the normal operation of the machine tool, so the installation of the machine tool should strictly comply with the installation conditions and requirements specified in the machine tool manual. If economic conditions permit, CNC lathes should be isolated from ordinary machining equipment to facilitate repair and maintenance.

(2) Equipped with CNC system programming, operation and maintenance of specialized personnel

These personnel should be familiar with the mechanical, numerical control system, strong electric equipment, hydraulic pressure, air pressure and other parts of the machine tool and the use of the environment, processing conditions, etc., and can use CNC lathes correctly according to the requirements of the machine tool and system instruction manual.

(3) CNC lathes run regularly

When the CNC lathe is idle, the CNC system should often be powered on, and the machine tool is locked to run it empty. In the Meiyu season with high air humidity, power should be turned on every day, and the electrical components themselves should heat away the moisture in the CNC cabinet to ensure the stable and reliable performance of the electronic components.

(4) Inspection of machine cable

Mainly check the moving joints of the cable line, whether there is bad contact, broken line and short circuit and other faults.

(5) Replace the battery in time

The parameter memory of some CNC systems uses CMOS components, and the stored content is maintained by battery power supply when the power is off. When there is a low voltage alarm, the battery must be replaced in time, and it must be carried out in the state of the control system power, otherwise the storage parameters will be lost, resulting in the CNC system can not work.

(6) Ensure hygiene and cleanliness

Such as air filter, electrical cabinet cleaning, printed circuit board cleaning.

biaxial cnc machine https://www.zjshuangzheng.com/